| Consumption max power | 1,100W max |
| Frequency response | 80 - 20,000Hz +/-3dB |
| Signal to noise ratio | > 95dB |
| Distortion factor | < 0,05% |
| Gain adjustment per channel | -100dB · 0dB, 1dB Steps |
| DSP | Integrated 24 bits 48kHz - 344 MIPS |
| FlexNET/Cobranet | 3 x FlexNet Redundant (automatic switching)/ Cobranet,Ethernet10/100Mbits. Female RJ-45 |
| Audio inputs | Audio Interface DCO-22 |
| PRIO audio inputs | 1 x Balanced audio 0.7Vrms 0dBV. 10kΩ, 3Pin, Euroblock |
| Pre-amp Audio Outputs | 4 x Balanced audio 0.7Vrms. 100Ω, 3Pin, Euroblock |
| Attenuators over-ride | 4 x Override 24Vdc, 40mA, 2 Pin (4 Pin Euroblock) |
| Emergency control inputs | 6 x 0-5Vdc, Monitored inputs, 2 Pin (4 Pin Euroblock) |
| Emergency control outputs | 2 x Relay contact Isolated Output, NO, Max 60Vdc 130mA |
| Class D Amplifiers | 4 x 125 W RMS @ 100 V |
| Speakers outputs | 8 (2x4) 100V, 2 Pin (4 Pin Euroblock) |
| Speakers loop inputs | 8 (2x4) CNo Voltage Contact, 3 Pin euroblock |
| Back-up amplifiers inputs | 1 Input per chanel, for amplifier with equal power |
| Protection | Over-temperature, infrasonic, short circuit, slow start-up, overload |
| Emergency Power Input | 20 - 28VDC, 32A Fused, 2 Pin Euroblock |
| Emergency Power Status Input | 3 x NO - NC, 3 Pin Euroblock |
| Operating conditions | -5°C to +45°C / 5 to 95% Relative humidity (No condensation) |
| Weight | 8kg |
| Dimensions | 483 x 88 x 455mm |
| IP Protection | IP30 |
| Accessories | 2 rack brackets, male Euroblock connectors, 1 Mains cable 2m, 1 Ethernet cable 2m |
