EXTENSION CONTROLLER WITH 4X250W OR 2X500W FOR MVA-8120 EXEO SYSTEM - EN54-16
ref. SVA-4250• SVA-4250 is an extension controller and a 4x500W amplifier or 2x1000W amplifier for the compact EN 54-16 PA/VA system EXEO.
• This extension unit scales the NEO system with 4 more zones as it includes 4 class D power amplifier channels at 100V or 70V lines.
• Audio is transmited from the main unit to this extension unit via daisy-chain connection via FlexNet. Therefore it guarantees maximum quality and integrity.
• The extension is fully configurable with the EXEO-Configurator software (included with EXEO). It is possible to configure remotely the unit as part of th whole EXEO system and create events to perform actions in the system triggered by conditions of: input level, date&time, UDP command, a GPIO or button
from MPS microphone.
Accessories (Provided) | 2 x Rack mounting, Male Euroblock connectors, installation screws, 4 x Rubber foot, 1 x Power cable 2m (EU Type), 1 x Ethernet Cable 2m |
Amplifier | 4 x 500W Class D, (250Wrms x 4) or 2x1000W (500Wrms x 2) @ 70 / 100V. Min load 40 Ω/20 Ω |
ATT Control | 4 x Override 24V DC, 8 x 40mA, 2 Pin, Euroblock Type (4 pin connector) |
Consumption | 1100W max / 200W at 1/8 output power/ 40W Standby |
Dimensions (W x H x D) | 483 x 88 x 455mm |
Distortion | <0,05 % under 60268-3 |
DSP | Integrated. 48 kHz, 24 bits - 344 MIPS |
Emergency Control Inputs | 6 x 0 - 5V DC, Monitored inputs, 2 Pin, Euroblock Type (4 pin connector) |
Emergency Control Outputs | 2 x Relay contact Isolated Output, NO, Max 60V DC 130mA, 2 Pin Euroblock Type (4 pin connector) |
Emergency Power Input | 1 x 20 - 28V DC, 32A, Fused (32 A), 2 Pin, Euroblock Type (2 pin connector) |
Emergency Power Status Inputs | 3 x NO - NC, 3 Pin, Euroblock Type |
Finish | Black - RAL 9005 |
FlexNet/Cobranet | 3 x FlexNet Redundant (automatic switching), Ethernet10/100Mbits. Female RJ-45 |
Frequency response | 80 - 20.000Hz +/-3dB |
Gain | -100dB -0dB, 1dB steps |
Operating condition | -5ºC to +45ºC / 5% to 95% Relative humidity (No condensation) |
Power source | 110-120V / 220-240V~ 50/60Hz |
Pre-amp Audio Outputs | 4 x Balanced audio 1Vp, 0,707Vrms. 100Ω , 3Pin Euroblock Type |
Prio / Ctrl . Input | 1 x Balanced audio, 1Vp, 0,707Vrms. 10000 Ω / 0 - 5V DC input 10000 Ω, 4Pin, Euroblock Type |
Protection | Over-temperature, DC, infrasonic, short circuit, slow start-up, overload. Start-up test |
S/N ratio | >98dB, A-weighted |
Spare Amplifier Inputs | 4 x 70 / 100V 250Wrms, 2 Pin, Euroblock Type (4 pin connector) |
Speaker Loop Input | 8 (4 dual x No Voltage Contact inputs, 3 Pin, Euroblock Type |
Speaker Outputs | 8 (4 dual managed lines) x 70 /100V. 2 Pin, Euroblock Type (4 pin connector) |
Weight | 9,8 kg |