Back

DUAL 8" 2 WAY BI-AMP LINE ARRAY SPEAKER

ref. NLA-8

NLA Series is designed for line array so it is possible to use in diversity locations. The 8” high quality of low sound driver was settled and two of 1” high output titanium tweeter is installed at waveguide so it can be made line sound of high level for necessary source of line array.
Base on the 1 degree, Each speaker can be controlled the degree from 0 to 10 degree and the degree of array is decided according to top and bottom angle of each speaker.
The high output tweeter that is installed in waveguide passes on stable sound signal to 90 degree of wide range and clearer sound can be played using by paging plug.
When the is composed, the arrangement of only NLA-8 can play wide range of frequency.
For music performance and other events, it is possible to install with sub woofer, NLA-18S, as flying type or ground stack to reinforce low sound.
The cabinet of NLA-18S is made by premium Birch plywood which is made in North Europe and the front panel is manufactured by steel grill.
The two pieces of NL4 connectors can be connect with power amplifier by directly or connect with speaker in parallel.

High quality driver

NLA-8 Series use the high quality driver for producing dynamic sound and super low sound. The driver that is used for NLA-8 Series has consistent quality and high durability and can be helped to operate stably under diversity circumstances. LF driver use the forced cooling system for maximum thermal efficiency and driver for high sound use titanium having low harmonics for playing without any distortion of sound.


Waveguide
The line array uses the ware guide for the minimizing of mutual interruption. This guide make to change the source of high sound from circular wave to linear wave so the mutual interruption become minimized when several speaker installed as one array.
Also, the design of NLA-8 Series are optimized for size of waveguide and NLA-8 Series improve the character of high sound.


Compact size of acoustic enclosure
Module type of speaker as present line array needs the compact size for interior.
The enclosing is designed for providing both powerful low sound and high sound pressure. So, even the compact size of NLA-8 Series can be working very well. Also, the clear sound can be provided as blocking of internal resonance and absorbing of unnecessary energy by high density of sound-absorbing material.


Strong and accurate rigging system
The rigging system that used for NLA-8 Series was made for the safe installation of flying, so it is possible to install strongly.
The control of array for one degree can be possible from 0 degree to 10 degree and based on the safety rate of 5:1, 16 boxes of NLA-8
can be made for one array.

Connector 2 x Amphenol NL4 on steel panel 1+/1-: LF, 2+/2-: HF
Dimensions (W x H x D) 694 x 256 x 486 mm
Directivity @ 1 KHz Horizontal 90° / Vertical 10°
Frequency range 75 Hz~18 kHz
Impedance LF : 16 Ω/HF : 16 Ω
Material Birch Plywood
Maximum SPL LF : 124 dB/HF: 122 dB
Power LF : 440W, HF : 60W
Sensibility LF : 98 dB/HF : 104 dB
Speaker LF: 2 x 203.2 mm(8") woofer HF: 2 x 25 mm(1") tweeter
Type Compact Line-array module 2X8" 2 Way Bi-Amp
Weight 24.4 kg
Need information ?Contact our team
Available accessories (option)
Back